GBADIE=0, DBLE=0, EXTRG=0, TRGE=0, ADST=0, ADCS=00
A/D Control Register
| DBLANS | Double Trigger Channel SelectThese bits select one analog input channel for double triggered operation. The setting is only effective while double trigger mode is selected. |
| GBADIE | Group B Scan End Interrupt Enable 0 (0): Disables S12GBADI1 interrupt generation upon group B scan completion. 1 (1): Enables S12GBADI1 interrupt generation upon group B scan completion. |
| DBLE | Double Trigger Mode Select 0 (0): Double trigger mode non-selection 1 (1): Double trigger mode selection |
| EXTRG | Trigger Select 0 (0): A/D conversion is started by the synchronous trigger (ELCTRG1). 1 (1): A/D conversion is started by the asynchronous trigger (ADTRG1#). |
| TRGE | Trigger Start Enable 0 (0): Disables A/D conversion to be started by the synchronous or asynchronous trigger. 1 (1): Enables A/D conversion to be started by the synchronous or asynchronous trigger. |
| ADCS | Scan Mode Select 0 (00): Single scan mode 1 (01): Group scan mode 2 (10): Continuous scan mode 3 (11): Setting prohibited |
| ADST | A/D Conversion Start 0 (0): Stops A/D conversion process. 1 (1): Starts A/D conversion process. |